Glossary entry (derived from question below)
English term or phrase:
Deckboard/Stringerboard
Spanish translation:
madera superior/larguero o travesaño
Added to glossary by
Gonzalo Palacios
Nov 28, 2017 15:59
6 yrs ago
5 viewers *
English term
Deckboard/Stringerboard
English to Spanish
Tech/Engineering
Materials (Plastics, Ceramics, etc.)
Pallets
Por ej. tengo las siguentes oraciones:
Bottom Stringerboards Perpendicular to Pallet Length:
- If exterior top **stringerboard** edges are flush with ends of top **deckboards**, Bottom Stringerboard Length must equal Pallet Width.
- If exterior top stringerboards are inset from ends of top deckboards, Bottom Stringerboard Length can be less than or equal to Pallet Width.
Y tambien cual sería la forma correcta de vertir las palabras sueltas relacionadas a lo anterior:
Stringer = ?
Deck = ?
Atento y agradecido por sus sugerencias!!
Bottom Stringerboards Perpendicular to Pallet Length:
- If exterior top **stringerboard** edges are flush with ends of top **deckboards**, Bottom Stringerboard Length must equal Pallet Width.
- If exterior top stringerboards are inset from ends of top deckboards, Bottom Stringerboard Length can be less than or equal to Pallet Width.
Y tambien cual sería la forma correcta de vertir las palabras sueltas relacionadas a lo anterior:
Stringer = ?
Deck = ?
Atento y agradecido por sus sugerencias!!
Proposed translations
1 day 21 hrs
Selected
madera superior/larguero o travesaño
Stringer Pallet
A stringer pallet is called that because it uses "stringers," which support the unit load. The stringers are the boards, typically 2 x 4's or 3 x 4's, sandwiched between the top and bottom deck boards.
http://www.larsonpkg.com/blog/different-types-of-pallets
Stringer pallet[edit]
Stringer pallets use a frame of three or more parallel pieces of timber (called stringers). The top deckboards are then affixed to the stringers to create the pallet structure. Stringer pallets can have a notch cut into them allowing "four-way" entry. Forklifts can lift a stringer pallet from all four directions, though lifting by the stringers is more secure.
Block pallet[edit]
Block pallets are typically stronger than stringer pallets. Block pallets utilize both parallel and perpendicular stringers to better facilitate efficient handling. A block pallet is also known as a "four-way" pallet, since a pallet-jack may be used from any side to move it.
https://en.wikipedia.org/wiki/Pallet#Stringer_pallet
Partes del palet
Plancha superior. La parte superior del palet se compone de diferentes tablas o, a veces, de una cobertura total del mismo.
Las tablas se encuentran espaciadas y el espacio entre ambas puede ser regular o irregular. Tienen el mismo espesor y el mismo largo, aunque el ancho puede variar según la tabla.
Se denomina plancha de cobertura total o de piso ciego cuando el espacio entre la planchas de entre 1 y 5 mm. Pueden ser del mismo ancho.
Plancha inferior. Es la parte inferior. Se forma gracias a tablas del mismo lago y espesor. También puede estar formada por patines que ayudan a su traslado
http://www.palets.com.es/index.php/es/informacion-tecnica/pa...
PR120100C1
Nombre Palet 120 x 100 con patín transversal
Descripción Palet recuperado 120 x 100 de fondo perdido con patín de 100
Capacidad de carga: hasta 500 Kg.
Otras características:
Entrada de la transpaleta por los 4 lados.
Dimensiones de los componentes:
-6/8 Maderas superiores de 1000 x 70/100 x 15/18
-3 travesaños de 1200 x 70/100 x 15/18
http://www.paletdirect.com/ES/38/palets-americanos-120-100.h...
3 KudoZ points awarded for this answer.
Comment: "Muchas gracias Lugoben y también Margarita! Saludos. "
52 mins
stringerboard = travesaños / deckboard = tarima de exterior o estrados
Saludos
Something went wrong...